Pulse counter D105
Smart Pulse Counter

The smart meter smart-MAC D105 is able to take control and monitoring for:
- two pulse meters for gas, water, heat, wind, beer, milk ...whatever!
- five digital temperature sensors
- one analog sensor 0-15V for pressure, humidity, leakage, voltage, etc.
With the built-in relay you can organize the automation with conditions. For example, using a value with an electro-drive, it is possible to stop the water supply if the pressure drops or a leakage sensor is triggered or more than 100 liters of water is consumed in an hour.
Key features:
- Monitoring, Analysis and Control for any kind of consumption
- Wi-Fi Wireless interface
- The free cloud data server
- Dashboard for data analysis and visualization
- One-Minute data detail
- Remote output management
- Emergency power and offline memory
- MQTT support
- API interface for developers
- DIN rail mounting
Measured parameters:
- incoming pulses on the 2nd channel, imp
- temperature using DS18x20 or DHT22 sensors
- humidity with DHT22 sensors
- analog input voltage, 0-15V
Pulse input | two |
Analog input | 0 – 15V |
Temperature measurement by sensor DS18x20 | –55°C +125°C, accuracy ±0.5°C |
Temperature and humidity measurement by DHT22 | –40°C +80°C, humidity 0-99% |
Temperature sensors | five DS18x20 or one DHT22 |
Maximum load power at the output | 50W |
Wireless communication protocol | IEEE 802.11 (b, g, n) |
Data refresh interval | 5 sec |
Data collection interval | 60 sec |
Save data without the connection | 11 days |
Operating temperature range | -40 . . +70 ºС |
Power | 100–240V, 50–60Hz, < 1W |
Dimensions | 90х63х34 mm |
Installation type | for DIN rail |
Weight | 0,1 kg |
User Manual Download »
Booklet Download »
Customer support service by UserEcho
Replies 0