Examples of connections (photo report)

Some pictures connecting smart energy meters smart-MAC.

"Dnipro"  Factory, Smila
Energy meters hav been installed throughout the facility and this at 24 hectars. The energy consumption of all production facilities, warehouses and household facilities is monitored.

Vladimir
Standard three-phase energy monitor connection. It's simple, turned off the power, unscrewed the wire, put on the transformer.


Nick
Single-phase smart meter in a city apartment. Describe, in General, all the same, long, clothed, tried, included WiFi, tuned and ready.


Volod
Three-phase jenergomonitory smart-MAC 300-D103 and the D103-21 in dry cleaning factory.

Edward
Three-phase connection. At the cottage.


Volod
Three-phase 300A energy monitors in the restaurant.


Alexey
Installing smart-MAC D105 for remote monitoring of water meters.
Step 1. Correct water meters with pule output.

Step 2. Connect pulse counter smart-MAC D105 to it.

Step 3. Use Dashboard


Volodymyr
Installation pulse smart-MAC D105. So far, only by temperature: supply and return with a gas boiler, street and house. Left the wire to the gas meter, let down and will complete :)
Temperature sensors overhead, just with thermal paste and screed.
Also recommended thermal insulation.

This article was helpful for 10 people. Is this article helpful for you?