Reset and restore the factory settings

To restore the factory settings, you must use the Reset button. Reset button is located near the top group of contacts. 

The Reset button has two functions:

  • Reboot the device - press the Reset button. After pressing the Reset button, the device will reboot and enter the wireless access point mode.
  • Restore factory settings - press and hold the Reset button for more than 5 seconds. After restoring the factory settings, the device will reboot and switch to the wireless access point mode. Connect to your wireless network and configure the device in accordance with Chapter 3, Connecting to a Wireless Network and Setting Parameters.

Restoring factory settings does not affect energy storage meters.
The wireless access point mode will automatically turn off after completing the device’s WEB interface.

This article was helpful for 4 people. Is this article helpful for you?