Pulse counter smart-MAC D105
Smart Pulse Counter
This device allows you to measure resource consumption by impulse readings from water meters, gas, electricity and other meters, equipped with pulse outputs.
The smart meter smart-MAC D105 is able to take control and monitoring for:
- two pulse meters for gas, water, heat, wind, beer, milk ...whatever!
- five digital temperature sensors
- one analog sensor 0-15V for pressure, humidity, leakage, voltage, etc.
With the built-in relay you can organize the automation with conditions.
Key features:
- Monitoring, Analysis and Control for any kind of consumption
- Wi-Fi Wireless interface
- The free cloud data server
- Dashboard for data analysis and visualization
- One-Minute data detail
- Remote output management
- Emergency power and offline memory
- MQTT remote client
- API interface for developers
- DIN rail mounting
Measured parameters:
- incoming pulses on the 2nd channel, imp
- 5 temperature sensors DS18x20 or one humidity and temperature sensors DHT22
- analog input voltage, 0-15V
Specifications:
| Pulse input | two |
| Analog input | 0 . . 15V |
| Temperature measurement by sensor DS18x20 | –55°C . . +125°C, accuracy ±0.5°C |
| Temperature and humidity measurement by DHT22 | –40°C . . +80°C, humidity 0-99% |
| Temperature sensors | five DS18x20 or one DHT22 |
| Maximum load power at the output | 50W |
| Wireless communication protocol | IEEE 802.11 (b, g, n) |
| Data refresh interval | 5 sec |
| Data collection interval | 60 sec |
| Save data without the connection | 11 days |
| Operating temperature range | -40 . . +60 ºС |
| Power | 100. . 240V, 50/60Hz, < 1W |
| Dimensions | 90х63х34 mm |
| Installation type | for DIN rail |
| Weight | 0,1 kg |
User Manual Download »
Customer support service by UserEcho
Replies 0