D105: Connecting the temperature and humidity sensor DHT22

Temperature and humidity sensor DHT22

Image 430

To the universal meter smart-MAC D105 can be connected one temperature and humidity sensor DHT22 or five DS18b20 temperature sensors.

DHT22 is a digital 1-wire temperature and humidity sensor.

Connection scheme:

  • Contact 1 sensor connects to terminal 6: 5B
  • Contact 2 sensors connect to terminal 4: Data 1-Wire
  • Contact 3 sensor is not used
  • Contact 4 sensors connect to terminal 1: GND (Earth or -5B)

Image 486

DHT22 sensor connection scheme to smart-MAC D105

Once you're connecting the sensor, open the device settings, the Counter config section, and select the appropriate type of "DHT22 Temperature and Humidity" sensor and click Save.

Image 476

DhT22 temperature and humidity sensor selection interface.

Sensor data will be stored in the next parameters:

  • T1 - the temperature in °C
  • T2 - relative humidity of 0 .. 100% RH

Image 484

Done!

This article was helpful for 18 people. Is this article helpful for you?